Contents
Screen Display
TomoShop has special layout for the screens which are developed with user friendliness and convenience. These are shown below.
Volume (2+2)
Volume (2+2) is the initial set of screen layout. It is a layout where plural directions of the 2D slice images (Axial-XY, Coronal-XZ, Sagittal-YZ) can be seen at the same time. It is designed from the Third angle projection method (Orthographic projection method) which is the most populer method in portraying a 3D design with a series of 2D views.
Volume (3+1)
It is the layout that allows you see large screen and another direction screens simultaneously. the screen displayed on the large screen can be selected freely.
Panoramic View
It is a convenient function that allows you to observe cross sections of 5 parts shown by curves at the same time.
Duplicate Screen
Duplicate Screen function is;
- Image display screens (slice images, 3D display screens) can be displayed separately and independently.
- It supports multi-monitor display (display using multiple monitors).
Printing
TomoShop is equipped with a convenient screen printing function.
Grid lines are printed on the background of the printed image. This makes it possible to grasp the actual size of the subject, so it is convenient when you want to check the dimensions.
Printing the screen (squares appear in the background)
You can print the displayed normal screen.
Actual size printing (Grid lines are attached to the background)
It is possible to print the displayed screen in actual size.
The image above is an example of printing image in actual size with grids (1mm) at the back.
(If you click the image above, it will be enlarged.)