TomoShop®, X-ray CT reconstruction software with artifact reduction tools (ring artifact, metal artifact, cupping artifact, etc) 2D/3D viewer, measurement functions & functions for connecting from CT to 3D printing, rapid prototyping etc.

Home

Welcome!

Please bookmark this site. We put valuable information about the solution for your CT problems, so why not bookmark it! Thank you.

If you have problems with the reconstruction result from CT, if you are developing or modifying your CT system, and looking for adequate high quality CT reconstruction software, we can provide the best solution for you. Please feel free to contact us.

The problems with X-ray CT reconstruction

In recent years X-ray CT has made remarkable progress, and it is active in non-destructive inspection mainly in various fields. The advantage of CT (Computed tomography) is that it is possible to visually observe details of invisible parts using CG (computer graphics) technology and others. Before X-ray CT was developed, it was done by observing X-ray roentgenographs. In the early days since the introduction of X-ray CT, two-dimensional slice images were mainly used, however with the development of three-dimensional CG technology detailed three-dimensional shape representation became possible. Today, we have reached the point of playing a leading role as a convenient non-destructive inspection method which allows visual observation of parts that can not be seen without breaking the real thing.

However, from the point of using X-ray CT, there are many problems caused by their characteristics. There are a problems called artifacts to give a representative example. The image below is a representative example of artifacts.

The above image is from the left, ring artifact, vertical artifact, metal artifact, cupping artifact (beam hardening, cupping effect). These artifacts are the noise that reflects shapes that do not actually exist.

There are also visual problems other than artifacts arising from the structural state and motion of the X-ray CT device. The image below is a typical example.

From the left image above, the problem image due to stage rotation error and X-ray focal movement, the problem image due to the rotation axis and the center and orientation of the camera (flat panel detector).

These problems have been serious troubles for many CT users in many years.

On the “Problems cases with X-ray CT scan” page, we will explain these solutions while taking these problems by case.

Our CT reconstruction software: TomoShop® series contributes to your research and development business by providing solutions to these X-ray CT problems.

Read more ☞  “Problem cases with X-ray CT scan” page

TomoShop® video

☞ Go to TomoShop® Video Page

Events

-2016/03/15 CT and 3D printing seiner will be held at System Create Co., LTD(Osaka Japan) TomoShop Viewer(Pro) will be discussed and displayed.
http://www.systemcreate-inc.co.jp/service/seminar/ct_seminar.html
-2016/02/04~05 We conduct the seminar in The 10th symposium of JSNDI “NDT by Radiation”.
http://www.jsndi.jp/e/index_2.html
-2015/02/16 Medical Messe in Nagoya
☞ http://www.nagoya-cci.or.jp/event/eventdisp.php?event_id=1412170001

-2014/06/03-04 Phase-contrast X-ray Imaging(PCI) Study Seminar by Dr. Hiquan Young (Developer of CT software TomoShop)
http://www.jsndi.jp/sciences/index2_1.html
-2014/02/25-28 We will exibit TomoShop® at ”ICT Conference 2014 (Austria)”, Please come to see us! ☞ http://www.3dct.at/cms2/index.php/en/welcome
-2014/02/06 JSNDI ☞ https://www.jsndi.or.jp/gaku/sas/sas00.do?gaku=14
-2014/01/15 INTERNEPCON Japan ☞ http://www.nepcon.jp/en/
-2013/10/30 New Technology in Manufacturing 2013 ☞ http://www.pref.aichi.jp/0000064185.html
-2013/06/03 JSNDI ☞ http://www.jsndi.jp/
-2013/02/22 Presentation at JSNDI ☞ http://www.jsndi.jp/e/index.html
-2012/12/14 Conference of JSPE Expert Committee for Convergence Engineering (Tokyo University) ☞ http://www.den.rcast.u-tokyo.ac.jp/conv/wiki/wiki.cgi
-2012/11/9-11 The Japan dental Show 2012 ☞ http://japan.dental-show.jp/outline/
-17 Sept 2012: A home page of TomoShop® a new innovative 3D X-ray CT software is out!

Information

New Features of Automatic Detection Tool

By using the range specified by 3D data, defect detection is conducted only in the partial area where is specified.

Strengthen ring artifact reduction function

Reduction of the stronger ring artifacts, the ring artifact that is not the center of the image…

Ultra-fast reconstruction function with multi-GPU is introduced!

Ultra-fast reconstruction function with multi-FPU is available now.

Multi-detector row CT scan function

Multi-detectior row CT scan functions are available now.

Helix Edition Series

New CT reconstruction software for helical CT is released

PAGETOP
Copyright © IKEDA Co., Ltd All Rights Reserved.
Powered by WordPress & BizVektor Theme by Vektor,Inc. technology.